The Xilinx® CAN LogiCORE™ IP product includes two configurations. The Standalone configuration is delivered through the Xilinx CORE Generator™ software, while the XPS CAN and AXI CAN LogiCORE IP cores are delivered through the Embedded Development Kit (EDK).
Full access to the core including bitstream generation capability requires that you generate and install a Full License Key for the core.
Two categories of Licensees are defined for the CAN core:
XA Class Devices
Licensees for designs which use Xilinx XA class FPGA devices must use the CAN LogiCORE IP product on Xilinx XA class devices ordered by referencing ordering codes of the format:
- XAxxxxx-yyyyyyIzzzz, or
- XAxxxxx-yyyyyyQzzzz
(Example: XA3S1000-4FGG456Izzzz)
" zzzz" is a CAN device identifier which can be obtained from the local Xilinx sales office.
Applicable license agreement:
Non-XA Class Devices
Licensees for the Xilinx CAN LogiCORE IP product for designs using Non-XA class devices are limited by the CAN LogiCORE IP license to cumulative devices orders by Xilinx customers of 20,000 devices or less.
If Licensee orders a cumulative quantity greater than 20,000 devices,
Licensee must contact Robert Bosch GmbH, Corporate Licensing
Department for an additional license.
By using the licensed materials, you are agreeing to be bound by the terms of the license.
Applicable license agreement:
LogiCORE Product Name |
Part Number |
|---|---|
CAN for Automotive Applications (including AXI and XPS CAN) |
EF-DI-CAN-XA-SITE |
CAN for Non-Automotive Applications (including AXI and XPS CAN) |
EF-DI-CAN-XC-SITE |
After purchasing a license for this core, you must install a Full
license key to activate Full access.
Please refer to the Master IP Release Note Guide for the latest information and Known Issues for this core.