Home : Products & Services : Intellectual Property : VLYNQ : VLYNQ System Requirements

VLYNQ LogiCORE IP - System Requirements

System Requirements
LogiCORE	Version	Software Requirements	Supported Device Families
VLYNQ	v1.4	ISE® 11.1 ISE IP Update 11.1 (IP_11.1) Installation instructions	Virtex®-5 FXT / SXT / LXT Virtex-5 FX / SX / LX Virtex-4 FX / SX / LX Spartan®-3E Spartan-3
	v1.3	ISE 10.1 or higher	Virtex-II Pro Virtex-II
Hardware Evaluation Time Out Period A Hardware Evaluation license for the LogiCORE™ IP VLYNQ core will enable you to parameterize, generate and instantiate this cores in your design. You will also be able to perform functional and timing simulation and generate a bitstream that you can use to download and configure your design in hardware. The IP cores will be fully functional in the programmed device for approximately 3 - 8 hours. After this time, the IP will "time out" (cease to function) and you will need to download and configure the FPGA again
Download the software requirements from the Software Updates page if you have not already done so.
Required Patches
Check the IP Release Notes Guide for information on any required patches.