IP Evaluation packages may be provided with the following:

• ISE™ CORE Generator™ IP customization GUIs
  • Use these to generate IP implementation netlists and Unisim-based functional simulation models
    
    
• 3 Month Hardware Evaluation License Keys
  • Many cores can be evaluated in hardware "out of the box" immediately (Processor/EDK IP cores), or enabled for hardware evaluation by installing a Full System Evaluation License Key (most fee-based cores shippped with ISE). Such cores typically cease to function in a programmed device after some number of hours. The actual number of hours varies, depending upon the core.

In some limited cases, the following may be provided instead:

• MTI pre-compiled Xilinx Simprim-based simulation models   

• IP customization GUIs which can be used to generate tailored, obfuscated behavioral models 

If the instructions direct you to contact your FAE, you may be asked to manually sign the hard copy Xilinx Core Evaluation License Agreement.

Please refer to the System Requirements link and IP core Gettng Started Guide (if available) for each individual package for core-specific information.

Xilinx LogiCORE™ IP may be licensed through your local Sales Representative.

Detailed ordering information is available under the Register & Order link on the product page for each core. A link to the IP core's product page can be found on its Evaluation Information page in the Related Products listing to the right.)