Interleaver/De-interleaver IP Core Evaluation
Xilinx supports Full System Hardware Evaluation for
these cores
- A Full System Hardware Evaluation version of these
cores allows you to do everything you can do with the Fully Licensed
IP core, including configure place and route, simulate, estimate timing
and program a Xilinx FPGA device.
Requirements
- Please refer to the Requirements link on the product page for
this core for information on:
- Software and system requirements
- Licensing terms and conditions for evaluation
Accessing Evaluation Files
Full System Hardware Evaluation
To perform a Full System Hardware Evaluation:you must request and
install a Full System Hardware Evaluation license key.
This will allow you to generate a bitstream that you can use to program
a Xilinx FPGA and evaluate the core in hardware for a limited amount
of time.
- Make sure you have satisfied the Requirements.
- Generate a Full System Hardware Evaluation License Key.
- The license will be generated and emailed to you automatically.
Install the license as directed by the email instructions.
- Follow the general instructions
below to load the CORE Generator™ IP customization GUI for this core
and generate the core.
- For some cores, an Example Design is written
to your project directory by CORE Generator system when you generate
the core. If an example design is provided, instructions will be
documented in a Getting Started Guide or User Guide document.
- To perform an in-depth evaluation in hardware in your own design:
- Instantiate the core in your own design, place and route the
design using ISE, then generate a bitstream and use it to program
an appropriate FPGA device.
Note
The evaluation core will cease to function in a programmed FPGA
device after a period of time. See the Requirements page for this
core for information on the duration of this time period.
General Instructions
- Start up the CORE Generator using either of the following two
methods:
- From ISE: Select Projects -> New Source
-> IP (Coregen and Architecture Wizard)
- From Windows: Select Programs -> Xilinx ISE ->
Accessories -> CORE Generator
- Locate your core the IP catalog section of the CORE Generator
window.
- Double click on the core to call up the customization GUI,
select your desired parameters, and click the "Finish"
button to generate the core.