|
|
|
Home : Products & Services : Intellectual Property : SPI-3 Link Layer : SPI-3 Link Layer Evaluation
SPI-3 Link Layer Evaluation
|
|
 |
| |
| Requirements |
|
Xilinx ISE™ 9.2i Service Pack or higher and ISE 9.2i IP Update 1 .
|
| License Terms |
The conditions of the  Logicore Evaluation license agreement apply toward your evaluation of this core. |
| Accessing the Evaluation Files |
| Simulation only Evaluation |
|
To perform a Simulation Only Evaluation:
- Start up the CORE Generator™ using either of the following
two methods:
- From ISE: Select Projects -> New Source
-> IP (Coregen and Architecture Wizard)
- From Windows: Select Programs -> Xilinx ISE 9.2i -> Accessories -> CORE Generator
- To access the core, double-click on the"Communication
and Networking" folder in the left hand panel of
the CORE Generator GUI, then double-click on the "Telecommunications"
folder. The SPI-3 Link Layer Core will appear in the right hand panel
of the CORE Generator GUI.
- Double-click on the SPI-3 Link Layer Core in the right hand
panel to call up its IP customization GUI.
- Select the desired options for the core, then click on
the Generate button.
- The following support files will be generated in your
CORE Generator project directory:
- .edn, .ngc, .veo, .vho, .xco, .xcp
- <core_name>_flist.txt
- a subdirectory named <user_core_name>
- a <user_core_name>_release_notes.txt file in
the <user_core_name> directory
Refer to the Quick Start Example Design chapter of the core's Getting Started Guide for instructions on how to proceed to evaluate the core.
[back to top] |
| Full System Hardware Evaluation |
To perform a Full System Hardware Evaluation: The procedures are the same as for the Simulation Only Evaluation, except that you must additionally generate and install a Full System Hardware Evaluation license:
- Generate a Full System Hardware Evaluation License
The license will be emailed to you automatically. Install the license as directed by the included instructions
- Start up the CORE Generator using either of the following two methods:
- From ISE: Select Projects -> New Source -> IP (Coregen and Architecture Wizard)
- From Windows: Select Programs -> Xilinx ISE 9.2i -> Accessories -> CORE Generator
- To access the core, double-click on the "Communication and Networking" folder in the left hand panel of the CORE Generator GUI, then double-click on the "Telecommunications" folder. The SPI-3 Link Layer Core will appear in the right hand panel of the CORE Generator GUI.
- Double-click on the SPI-3 Link Layer Core in the right hand panel to display its IP customization GUI.
- Select the desired options for the core, then click on the Generate button.
- The following support files will be generated in your CORE Generator project directory:
- .edn, .ngc, .veo, .vho, .xco, .xcp
- <core_name>_flist.txt,
- a <user_core_name>_release_notes.txt file in the <user_core_name> directory
Refer to the Quick Start Example Design chapter of the core's Getting Started Guide for instructions on how to proceed to evaluate the core.
[back to top] |
| Known Issues |
|
For SPI-3 Link Layer release notes, and Known Issues, see Answer Record #25222.
[back to top] |
| Learn More |
|
You can learn more about the Xilinx SPI-3 Link Layer LogiCORE by visiting the SPI-3 Link Layer Core product page.
[back to top] |
|
|
|
|
