ML300 Lounge

ML300 Embedded Development Kit (EDK) Designs

This ML300 example design uses the Embedded Development Kit. An IBM Core Connect™ infrastructure connects the CPU to numerous peripherals using Processor Local Bus (PLB), On-Chip Peripheral Bus (OPB), and Device Control Register (DCR) buses to build a complete system. The ML300 EDK Reference Design User Guide (PDF) document describes the contents of the reference system and provides information about how the system is organized and implemented. Please refer to this document before proceeding with this design.

• This design requires EDK 6.2, as well as ISE® 6.2 (with no service packs applied).
• EDK ML300 Embedded PPC405 Reference System (ZIP)
  • This download is a complete EDK project file containing hardware and software designs for the ML300 Evaluation Platform.
• For more information about ML300/EDK labs please check the EDK Example Designs page.

ML300 Microdrive Images

To re-image your Microdrive follow the ML300 Microdrive re-imaging instructions (PDF) but whenever the step specifies 'md.img.v2pdk', replace that text with 'md.img'.

• md.img (ZIP)
• uDriveImageTools (ZIP)