Dual Channel 12-bit A/D and 16-bit D/A FMC - 1 Gsps

Device Family Support

• Virtex-6 LXT

The FMC110 is a dual channel A/D and dual channel D/A FMC. The FMC110 provides two channels of 12-bit A/D @ 1 GSPS and two channels of 16-bit D/A @ 1 GSPS enabling simultaneous sampling at a maximum rate of 1 GSPS. The sample clock can be supplied externally through a coax connection or supplied by an internal clock source (optionally locked to an external reference). Additionally a trigger input for customized sampling control is available. The FMC110 daughter card is mechanically and electrically compliant to FMC standard (ANSI/VITA 57.1). The card has a high-pin count (HPC) connector, front panel I/O, and can be used in a conduction cooled environment as well as a conventionally (air) cooled environment. The FMC110 allows flexible control on clock source, sampling frequency, and calibration through a serial communication bus. The FMC110 card is equipped with power supply and temperature monitoring with several power-down modes to switch off unused functions, reducing system level power and heat, well suited for software defined radio (SDR), battery or other low power source applications. This is ideal for applications such as airborne where power demand effects mission range and on-station mission time.

What's Included

• Dual – A/D – D/A Channel Operation
• VITA 57.1-2010 compliant
• Conduction Cooled – Standard Option
• Single ended AC-coupled analog input.
• Clock Source, Sampling Frequency, and Calibration through an SPI communication bus
• Mil-I-46058c Conformal Coating Compliant (optional)
• HPC – High Pin Count Connector
• 6 front panel SSMC connectors
• 2Kbit EEPROM (24LC02B) accessible from the Host via I2C bus
• JTAG - CPLD device is included in the JTAG chain accessible from the FMC connection
• 4 rocket I/O pairs and 4 LVTTL lines available on the front panel
• HDMI connector for user defined signaling

Key Features

• •2Kbit EEPROM (24LC02B) accessible from the Host via I2C bus
• •4 rocket I/O pairs and 4 LVTTL lines available on the front panel
• •6 front panel SSMC connectors
• •Clock Source, Sampling Frequency, and Calibration through an SPI communication bus
• •Conduction Cooled – Standard Option
• •Dual – A/D – D/A Channel Operation
• •HDMI connector for user defined signaling
• •HPC – High Pin Count Connector
• •JTAG - CPLD device is included in the JTAG chain accessible from the FMC connection
• •Mil-I-46058c Conformal Coating Compliant (optional)
• •Single ended AC-coupled analog input.
• •VITA 57.1-2010 compliant

Targeted Applications

• Aerospace and test measurement instruments