******************************************************************************* ** Copyright © 2006, Xilinx, Inc. ** This design is confidential and proprietary of Xilinx, Inc. All Rights Reserved. ******************************************************************************* ** ____ ____ ** / /\/ / ** /___/ \ / Vendor: Xilinx ** \ \ \/ Version: 1.0 ** \ \ Filename: iic_eeprom_readme.txt ** / / Date Last Modified: 8/31/2006 ** /___/ /\ Date Created: 8/31/2006 ** \ \ / \ ** \___\/\___\ ** **Device: **Purpose: **Reference: ** ******************************************************************************* ** ** Disclaimer: LIMITED WARRANTY AND DISCLAIMER. These designs are ** provided to you "as is." Xilinx and its licensors make and you ** receive no warranties or conditions, express, implied, ** statutory or otherwise, and Xilinx specifically disclaims any ** implied warranties of merchantability, noninfringement, or ** fitness for a particular purpose. Xilinx does not warrant that ** the functions contained in these designs will meet your ** requirements, or that the operation of these designs will be ** uninterrupted or error free, or that defects in the Designs ** will be corrected. Furthermore, Xilinx does not warrant or ** make any representations regarding use or the results of the ** use of the designs in terms of correctness, accuracy, ** reliability, or otherwise. ** ** LIMITATION OF LIABILITY. In no event will Xilinx or its ** licensors be liable for any loss of data, lost profits, cost ** or procurement of substitute goods or services, or for any ** special, incidental, consequential, or indirect damages ** arising from the use or operation of the designs or ** accompanying documentation, however caused and on any theory ** of liability. This limitation will apply even if Xilinx ** has been advised of the possibility of such damage. This ** limitation shall apply notwithstanding the failure of the ** essential purpose of any limited remedies herein. ** ******************************************************************************* Application: iic_eeprom ------------------------ The IIC EEPROM device is written with 512 bytes of zeros and then readback for verification. Next, 256 bytes with a value increasing from 0x00 to 0xFF is written, followed 256 more bytes of a decreasing value from 0xFF to 0x00. CONFIG Switch Settings: 00010101 1. Connect the Host PC to the ML501 (J1 header) using a PC-IV or Platform USB JTAG cable 2. Connect the Host PC serial port to the ML501 serial port using a null modem cable and launch a terminal program on the Host (eg. TeraTerm) with the settings: 9600 baud, 8-N-1, No flow control 3. Launch XPS and open the ML501 EDK project (system.xmp) 4. Launch a Shell window using XPS menu selection: Project > Launch EDK Shell 5. Download bitstream in shell window by typing: impact -batch etc/download.cmd 6. XPS menu selection: Debug > Launch XMD 7. At XMD% prompt type: cd microblaze_0/code 8. At XMD% prompt type: rst 9. At XMD% prompt type: dow iic_eeprom.elf 10. At XMD% prompt type: con Serial Port Output: ------------------- Bitbang IIC EEPROM test Writing all Zeros to IIC EEPROM Reading back from IIC EEPROM 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Writing 0x00->0xFF then 0xFF->0x00 to IIC EEPROM Reading back from IIC EEPROM 0 1 2 3 4 5 6 7 8 9 A B C D E F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5D 5E 5F 60 61 62 63 64 65 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D 7E 7F 80 81 82 83 84 85 86 87 88 89 8A 8B 8C 8D 8E 8F 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9E 9F A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FF FE FD FC FB FA F9 F8 F7 F6 F5 F4 F3 F2 F1 F0 EF EE ED EC EB EA E9 E8 E7 E6 E5 E4 E3 E2 E1 E0 DF DE DD DC DB DA D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 CF CE CD CC CB CA C9 C8 C7 C6 C5 C4 C3 C2 C1 C0 BF BE BD BC BB BA B9 B8 B7 B6 B5 B4 B3 B2 B1 B0 AF AE AD AC AB AA A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 9F 9E 9D 9C 9B 9A 99 98 97 96 95 94 93 92 91 90 8F 8E 8D 8C 8B 8A 89 88 87 86 85 84 83 82 81 80 7F 7E 7D 7C 7B 7A 79 78 77 76 75 74 73 72 71 70 6F 6E 6D 6C 6B 6A 69 68 67 66 65 64 63 62 61 60 5F 5E 5D 5C 5B 5A 59 58 57 56 55 54 53 52 51 50 4F 4E 4D 4C 4B 4A 49 48 47 46 45 44 43 42 41 40 3F 3E 3D 3C 3B 3A 39 38 37 36 35 34 33 32 31 30 2F 2E 2D 2C 2B 2A 29 28 27 26 25 24 23 22 21 20 1F 1E 1D 1C 1B 1A 19 18 17 16 15 14 13 12 11 10 F E D C B A 9 8 7 6 5 4 3 2 1 0 IIC TEST Passes - OK.