|
Built upon the ML505 BSB and EDK's automatically generated library of device drivers and platform support, these Stand-Alone software applications can be used to gain familiarity with the EDK software development tools while exercising features on the ML505 board.
|
|
BSB MicroBlaze IP
- microblaze - 125 MHz
- mpmc - 125 MHz
- plb_v46 - 125 MHz
- lmb_bram_if_cntlr
- bram_block
- clock_generator
- proc_sys_reset
- util_bus_split
- xps_gpio
- xps_iic
- xps_intc
- xps_ll_temac
- xps_mch_emc
- xps_sysace
- xps_uart16550
- lmb_v10
- xps_timer
- mdm
|
| Tutorial showing an example ML505 design generated with the XPS BSB wizard.
|
|
Standard IP Added
- xps_tft
- xps_ps2
- Additional xps_gpio
- Additional xps_iic
- 2nd plb_v46
- plbv46_plbv46_bridge
- util_vector_logic
|
| Tutorial showing an how to add Standard Supported IP to the ML505 BSB design using the EDK GUI. Adds video (DVI/VGA), PS/2 Interface, GPIO, and IIC, and supporting IP. This tutorial also provides a Gigabit Ethernet demonstration using the integrated Virtex-5 Tri-mode MAC and the open-source LWIP TCP/IP stack as described in XAPP1026.
|
|
Pcores and Standard IP Added
- opb_ac97_controller_ref (Pcore)
- opb_v20
- plbv46_opb_bridge
- xps_epc
- util_io_mux (Pcore)
|
| Tutorial showing an how to add a AC '97 Pcore, XAPP 925 USB, and SGMII, to the ML505 STD IP design using the EDK GUI. This tutorial also provides a Gigabit Ethernet demonstration using the integrated Virtex-5 Tri-mode MAC and the open-source LWIP TCP/IP stack as described in XAPP1026.
|
