Xilinx ML505 Base System Builder Design

ML505 Stand-Alone Applications & Board Tests

Built upon the ML505 BSB and EDK's automatically generated library of device drivers and platform support, these Stand-Alone software applications can be used to gain familiarity with the EDK software development tools while exercising features on the ML505 board.

• ML505 Stand-Alone Applications & Board Tests

ML505 EDK BSB Design

BSB MicroBlaze IP

• microblaze - 125 MHz
• mpmc - 125 MHz
• plb_v46 - 125 MHz
• lmb_bram_if_cntlr
• bram_block
• clock_generator
• proc_sys_reset
• util_bus_split
• xps_gpio
• xps_iic
• xps_intc
• xps_ll_temac
• xps_mch_emc
• xps_sysace
• xps_uart16550
• lmb_v10
• xps_timer
• mdm

Tutorial showing an example ML505 design generated with the XPS BSB wizard.

ML505 BSB Design Creation (PDF)
ml505_bsb_design.zip (PDF)

ML505 EDK BSB Design with Standard IP Addition

Standard IP Added

• xps_tft
• xps_ps2
• Additional xps_gpio
• Additional xps_iic
• 2nd plb_v46
• plbv46_plbv46_bridge
• util_vector_logic

Tutorial showing an how to add Standard Supported IP to the ML505 BSB design using the EDK GUI. Adds video (DVI/VGA), PS/2 Interface, GPIO, and IIC, and supporting IP. This tutorial also provides a Gigabit Ethernet demonstration using the integrated Virtex-5 Tri-mode MAC and the open-source LWIP TCP/IP stack as described in XAPP1026.

ML505 BSB Design Std IP Addition (PDF)
ml505_bsb_std_ip.zip (ZIP)

ML505 EDK Standard IP Design with Pcores Addition

Pcores and Standard IP Added

• opb_ac97_controller_ref (Pcore)
• opb_v20
• plbv46_opb_bridge
• xps_epc
• util_io_mux

Tutorial showing an how to add a AC '97 Pcore, XAPP 925 USB, and SGMII, to the ML505 STD IP design using the EDK GUI. This tutorial also provides a Gigabit Ethernet demonstration using the integrated Virtex-5 Tri-mode MAC and the open-source LWIP TCP/IP stack as described in XAPP1026.

ML505 STD IP Design Pcore Addition (PDF)
XAPP 925 - USB with OPB EPC Controller (PDF)
ml505_std_ip_pcores.zip (PDF)