ML507 Base System Builder Design

ML507 Stand-Alone Applications & Board Tests

Built upon the ML507 BSB and EDK's automatically generated library of device drivers and platform support, these Stand-Alone software applications can be used to gain familiarity with the EDK software development tools while exercising features on the ML507 board.

• ML507 Microblaze™ Stand-Alone Applications & Board Tests
• ML507 PPC440 Stand-Alone Applications & Board Tests

ML507 EDK BSB Design

BSB1 MicroBlaze IP	BSB1 PPC440 IP
microblaze - 125 MHz mpmc - 125 MHz plb_v46 - 125 MHz lmb_bram_if_cntlr bram_block clock_generator proc_sys_reset util_bus_split xps_gpio xps_iic xps_intc xps_ll_temac xps_mch_emc xps_sysace xps_uart16550 lmb_v10 xps_timer mdm	ppc440_virtex5 - 300 MHz ppc440mc_ddr2 - 200 MHz plb_v46 - 100 MHz xps_bram_if_cntlr bram_block clock_generator proc_sys_reset util_bus_split xps_gpio xps_iic xps_intc xps_ll_temac xps_ll_fifo xps_mch_emc xps_sysace xps_uart16550 jtagppc_cntlr

Tutorial showing an example ML507 design generated with the XPS BSB wizard.

• ML507 BSB Design Creation (PDF)
• ml507_bsb_design.zip (ZIP)
• ML507 BSB PPC440 Design Creation (PDF)
• ml507_bsb_design_ppc440.zip (ZIP)

ML507 EDK BSB Design with Standard IP Addition

Standard IP Added

• xps_tft
• xps_ps2
• Additional xps_gpio
• Additional xps_iic
• 2nd plb_v46
• plbv46_plbv46_bridge
• util_vector_logic

Tutorial showing an how to add Standard Supported IP to the ML507 BSB design using the EDK GUI. Adds video (DVI/VGA), PS/2 Interface, GPIO, and IIC, and supporting IP. This tutorial also provides a Gigabit Ethernet demonstration using the integrated Virtex-5 Tri-mode MAC and the open-source LWIP TCP/IP stack as described in XAPP1026.

• ML507 BSB Design Std IP Addition (PDF)
• ml507_bsb_std_ip.zip (ZIP)
• ML507 BSB PPC440 Design Std IP Addition (PDF)
• ml507_bsb_std_ip_ppc440.zip (ZIP)

ML507 EDK Standard IP Design with Pcores Addition

Pcores and Standard IP Added

• opb_ac97_controller_ref (Pcore)
• opb_v20
• plbv46_opb_bridge
• xps_epc
• util_io_mux (Pcore)

Tutorial showing an how to add a AC '97 Pcore, XAPP 925 USB, and SGMII, to the ML507 STD IP design using the EDK GUI. This tutorial also provides a Gigabit Ethernet demonstration using the integrated Virtex-5 Tri-mode MAC and the open-source LWIP TCP/IP stack as described in XAPP1026.

• ML507 Std IP Design Pcore Addition (PDF)
• ml507_std_ip_pcores.zip (ZIP)
• ML507 Std IP PPC440 Design Pcore Addition (PDF)
• ml507_std_ip_pcores_ppc440.zip (ZIP)
• XAPP 925 - USB with OPB EPC Controller (PDF)