ML510 ChipScope™ Pro Serial IO Toolkit Demonstration Design
Your ML510 Evaluation Platform is a general purpose board that ships with a number of demonstration designs pre-installed on the Compact Flash card and Linear Flash memories. The ML510 Quickstart Tutorial describes these demonstration applications.
ML510 Quickstart Tutorial (PDF)
ML510 Base System Builder & Reference Design Material
The Xilinx Base System Builder (BSB) wizard helps users quickly build a working embedded processing system design through an easy to use GUI interface. The XPS project created by BSB can be run as generated or further enhanced with peripherals added from the EDK IP catalog. OS Applications are provided on the BSB & Reference Designs page.
ML510 Reference Design User Guide (PDF)
ML510 Overview and Setup (PDF)
Master UCF Pin Constraints
EDK 10.1 SP2/ISE 10.1 SP2
ML510 BSB & Reference Designs
ML510 BSB PPC 440 Design with VxWorks
The ML510 BSB PPC440 design with Workbench 2.5 VxWorks
design files.
ML510 VxWorks Design
ML510 IBERT Design
The ML510 Evaluation Platform is built around the Virtex-5 XC5VFX130T FPGA with high performance RocketIO™ GTX transceivers. This design contains a tutorial demonstrating how to generate an IBERT design that exercises the GTX transceivers using the ChipScope™ Pro Serial IO Toolkit.
ML510 IBERT Design
ML510 ChipScope Pro System Monitor
This Quickstart utilizes the ChipScope Pro System Monitor Console to display device voltages, temperatures, and external signal levels. The System Monitor feature is built into all Virtex-5 devices.
ML510 System Monitor Quickstart (PDF)
ML510 Configuration Methods
The ML510 can be used to demonstrate a variety of Virtex-5 configuration methods. Initial board bring-up and testing can be accomplished with the Xilinx tools, a JTAG cable, along with the bitstreams and ELF files from the ML510 standalone applications page. Subsequently, ACE files containing both hardware and software initialization components can be generated and loaded from a CompactFlash card by the onboard System ACE™ CF controller. A new Virtex-5 configuration method loads bitstreams directly from a linear flash memory device. Demonstrating the various Virtex-5 configuration methods is user-selectable through a DIP switch.
ML510 Flash Images
Virtex-5 Configuration User Guide (PDF)