UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AXI Video DMA LogiCORE IP Offerings and Software Requirements

SOFTWARE Requirements Table

LogiCORE™ Version AXI4 Support Software Support Supported Device Families
AXI Video DMA v6.3 AXI4
AXI4-Stream
AXI4-Lite
Vivado® 2017.3 Kintex® UltraScale+™
Virtex® UltraScale+
Zynq® UltraScale+
Kintex UltraScale™
Virtex UltraScale
Zynq-7000
Artix®-7
Kintex-7
Virtex-7
AXI Video DMA v5.04a AXI4
AXI4-Stream
AXI4-Lite
ISE® 14.4
EDK® 14.4
Zynq-7000
Kintex-7
Virtex-7
Virtex-6 CXT / HXT / LXT / SXT
Spartan-6 LXT / LX

Download the required software from the Xilinx.com Downloads page. For information on New Features, Known Issues, and Patches please refer to the Licensing Solution Center.

* A Hardware Evaluation license for any of the IP cores above will enable you to parameterize, generate and instantiate these cores in your design. You will also be able to perform functional and timing simulation and generate a bitstream that you can use to download and configure your design in hardware.

The IP cores in this table will be fully functional in the programmed device for certain amount of time. After this time, the IP will "time out" (cease to function) and you will need to download and configure the FPGA again.

Page Bookmarked