FOR IMMEDIATE RELEASE

Mentor Graphics Enhances HyperLynx Signal Integrity Analysis Tools for Multi-Gigabit Speeds

WILSONVILLE, Ore., July 7, 2003 - Mentor Graphics Corporation, the market leader in printed circuit board (PCB) design software, today announced the immediate availability of the HyperLynx® 7.0 tool, the latest version of its powerful and easy-to-implement tool suite for pre- and post-layout signal integrity (SI) simulation and analysis. The HyperLynx tools address the challenges caused by the increasing clock frequencies of integrated circuits (ICs) on high-speed digital PCBs that can create degraded digital signals. Compatible with all major PCB layout environments, the HyperLynx 7.0 tool allows PCB hardware designers to predict and eliminate SI, crosstalk and electromagnetic compliance (EMC) errors earlier in the design cycle, eliminating costly layout, prototype and test cycles.

With the introduction of The HyperLynx 7.0 tool, Mentor is offering two versions, The HyperLynx EXT tool for mainstream designs with clock frequencies under 500 MHz, and the HyperLynx GHz tool for multi-gigabit designs. The HyperLynx EXT 7.0 tool includes many new user-requested features, such as new impedance planning technology, the addition of a spreadsheet-based stackup editor, expanded capabilities for differential signals and IBIS enhancements. The HyperLynx GHz 7.0 tool also features support for multi-gigabit signals, SPICE models and eye diagrams.

"PCB design engineers are being required to minimize both their development and production costs, while meeting increasingly tough timing specifications," said Austin Lesea, principal engineer at Xilinx. "For the 3.125 Gbps speeds that our RocketIO™ technology enables, proper signal integrity analysis will deliver a robust design with the fewest number of board spins and the highest PCB production yields. This new version of the HyperLynx tool makes it easier for users of our RocketPHY™ and Virtex-II Pro™ families to achieve these important goals."

New Standards Demand Advanced Simulation Capabilities
As emerging high-speed, asynchronous, serial bus standards such as PCI Express™, HyperTransport, RapidIO™, InfiniBand™ and XAUI are adopted, SI is becoming more critical and at the same time, more complex to analyze. In addition to classic SI problems like overshoot, undershoot, ringing and timing, these designs require that hardware engineers analyze many other factors, adhering to extensive manufacturer specifications that outline technology-specific loss budgets, and bit-error rate (BER) requirements.

"The fast speeds of today's ICs require that every hardware designer do some level of SI analysis. In addition, many PCB designers are facing significantly different SI challenges as they incorporate ASICs and FPGAs based on the latest serial bus architectures," said Joe Dalton, director of marketing, Systems Design Division, Mentor Graphics. "The HyperLynx EXT tool is well-known for being a reasonably priced, easy-to-use tool for traditional SI analysis. With the HyperLynx GHz tool, customers will be able to quickly analyze multi-gigabit designs, using the same familiar, user-friendly interface they have been accustomed to."

New Features in HyperLynx 7.0
The line loss associated with signals in the gigabit range necessitates the analysis of inter-symbol interference (ISI) and simulation with "eye diagrams," a visual representation of simulation results based on a long, multi-cycle bit sequence. Varying the bit sequence facilitates detection of problems in signal quality, producing waveforms that, ideally, resemble the human eye. The degree to which the center of the eye appears open at the receiver IC is a key factor in judging the signal's effectiveness. The HyperLynx GHz tool is able to model and analyze high-speed effects, and to show their impact on individual waveforms as well as in eye diagrams.

In addition to eye diagram capability, the HyperLynx 7.0 tool includes new features and enhancements for painlessly setting up multi-gigabit SPICE simulations, advanced modeling and frequency dependent transmission line analysis, multi-bit stimulus and jitter. Additional ease of use and productivity enhancements, such as the new stackup editor, allow users to view design data in spreadsheet and graphical format, and edit stackup data using a spreadsheet-based, customizable editor. This is further enhanced with a single-ended and differential impedance planning tool. New functionality in The HyperLynx 7.0 tool also includes support for differential terminations in Terminator Wizard and the product's Quick Terminator feature, and enhancements to the Visual IBIS Editor.

"Beyond the digital backplane speed barrier at one Gb/s, the prediction and management of high-frequency lossy phenomena becomes extremely important. Survival in the new world of high-speed design depends on the quality of one's tools," said Dr. Howard Johnson, President of Signal Consulting, and author of the popular text, High-Speed Digital Design: A Handbook of Black Magic.

Support for all Major PCB Layout Tools
The HyperLynx tool is compatible with each of Mentor's PCB design flows: The BoardStation®, Expedition™ and PADS® tools ; and with PCB layout tools from Cadence, Altium and Zuken. The Mentor Graphics® HyperLynx and ICX® SI analysis tools can be used in conjunction with the Tau® timing analysis product for complete system and PCB verification capability.

Pricing and Availability
The HyperLynx 7.0 tool is available immediately with entry pricing starting at $4,000 and fully functioned at $17,500. The HyperLynx EXT 7.0 tool is available as a free upgrade to existing HyperSuite® EXT tool customers with maintenance agreements in place. More information, as well as a free high-speed design tutorial and software demonstration is available at www.mentor.com/hyperlynx or by calling 800-547-3000.

About Mentor Graphics
Mentor Graphics Corporation (Nasdaq: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world's most successful electronics and semiconductor companies. Established in 1981, the company reported revenues over the last 12 months of about $600 million and employs approximately 3,500 people worldwide. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777; Silicon Valley headquarters are located at 1001 Ridder Park Drive, San Jose, California 95131-2314. World Wide Web site: www.mentor.com.

#0400

Mentor Graphics, Board Station, HyperLynx, HyperSuite, ICX, Tau and PADS are registered trademarks and Expedition is a trademark of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.

Editorial contact:

Amy Attard

Xilinx , Inc.

(408) 626-5967

amy.attard@xilinx.com