UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 10424

4.1i Install - The installation hangs at 0% completion.

Description

Keywords: Install, 3.1i, FISE, Foundation, Alliance, hang, 0, percent

Urgency: Standard

General Description:
When I attempt to install a Xilinx 3.1i software package, the procedure stops at 0%. The bar continues to change shades, but the completion status never changes.

Solution

Some system monitoring tools (specifically Norton software) will prevent the Xilinx tools from installing completely. If Norton software is installed, disable it and run the installation again.

If this does not solve the problem, please see (Xilinx Answer 9798) for additional help.
AR# 10424
Date Created 11/01/2000
Last Updated 10/02/2003
Status Archive
Type General Article