UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 10566

3.1i Virtex PAR - "FATAL_ERROR:Route:basrtsanity.c:168:1.7.28.1 - Process will terminate."

Description

Keywords: Modular, guide, basrtsanity.c, 168

Urgency: Standard

General Description:
Cases have been seen where the following error occurs after PAR has loaded
a modular design NCD file for guide purposes:

"FATAL_ERROR:Route:basrtsanity.c:168:1.7.28.1 - Process will terminate."

This is due to the placer not correctly checking to see if a site is already occupied.

(NOTE: This particular solution record applies only to modular design cases.)

Solution

This problem is fixed in the latest 3.1i Service Pack available at:
http://support.xilinx.com/support/techsup/sw_updates. The first
service pack containing the fix is 3.1i Service Pack 6.
AR# 10566
Date Created 08/29/2007
Last Updated 10/21/2008
Status Archive
Type General Article