UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 10768

WebPACK - Fitter options set in the GUI are not correctly displayed in the fitter report

Description

Keywords: XPLA3

For XPLA designs, users can set the Collapsing PTerm Limit, Collapsing Input Limit, and Block Input Limit in the GUI. However, when I view the fitter report, it displays values that are different from the ones I entered in the GUI.

Solution

The fitter is using the values given in the GU, however, the reporting is not being performed correctly.

This issue is fixed in the latest version of the WebPACK XPLA Fitter Module, which is available for download at:
http://www.xilinx.com/support/download/index.htm
AR# 10768
Date Created 08/29/2007
Last Updated 07/28/2009
Status Archive
Type General Article