UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1112

XC5200: Typo reads "50-kW to 100-kW pull-up resistor" in 'The Programmable Logic Data Book', 7/96

Description

Keywords:

There is a printing error on page 4-204 of the Xilinx 7/96
data book. At the bottom of the page, it reads:

"Before and during configuration, all outputs that are not
used for the configuration process are 3-stated with a 50-kW
to 100-kW pull-up resistor.

Solution

This should read:

"Before and during configuration, all outputs that are not
used for the configuration process are 3-stated with a 50-kohm
to 100-kohm pull-up resistor."



In reality, the most recent 5200 parts have a pullup of a
range between 20K and 100K ohms
AR# 1112
Date Created 07/24/1996
Last Updated 03/03/2004
Status Archive
Type General Article