UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 11130

3.1i Virtex-II PAR - "INTERNAL_ERROR:SpeedCalc:basndtiming.c:887:1.6 - Getnodeparms for node not on signal."

Description

Keywords: PAR, router, routing, Getnodeparms, node, signal, SHIFTOUT, INTERNAL_ERROR:SpeedCalc:basndtiming.c:887:1.6

Urgency: Hot

General Description:
Virtex-II designs containing slices that use the SHIFTOUT pin fail during routing with the following error:

"INTERNAL_ERROR:SpeedCalc:basndtiming.c:887:1.6 - Getnodeparms for node not on signal."

Solution

To avoid this error, please use the following FTP patches, which are available for use with 3.1i Service Pack 8:

http://www.xilinx.com/txpatches/pub/swhelp/M3.1i_updates/31i_par_pc_11130.zip
http://www.xilinx.com/txpatches/pub/swhelp/M3.1i_updates/31i_par_sol_11130.tar.gz

PC installation:
Unzip in the XILINX install directory while maintaining directory structure.

Workstation installation:
cd $XILINX
gzip -d 31i_par_sol_11130.tar.gz
tar xvf 31i_par_sol_11130.tar
AR# 11130
Date Created 08/29/2007
Last Updated 10/21/2008
Status Archive
Type General Article