We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 11266

4.1i CORE Generator Multiplier - The "SCLR Overrides CE" option does not function correctly


Keywords: Virtex-II, Multiplier, override, SCLR, CE

Urgency: Standard

General Description:
I am creating a multiplier for the Virtex-II in CORE Generator. If I set the "SCLR Overrides CE" option, this information does not get passed on. Regardless of what selection is made, the following appears in the XCO file:

CSET ce_overrides = CE_Overrides_SCLR


A work-around is to add the logic externally to the multiplier core; this will force the CE signal High whenever a synchronous reset is applied:

CE_core = CE_in or SCLR;

However, this process does add some delay on the CE line.

This problem has been fixed in Multiplier V4_0, which is available in 4.1i IP Update #1:
AR# 11266
Date Created 03/22/2001
Last Updated 09/11/2003
Status Archive
Type General Article