We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 11507

HDL Bencher - When performing clock timing, how can I toggle input signals asynchronously in the waveform?


Keywords: HDL Bencher, simulation, testbench, clock, VHDL, Verilog, time, edge

Urgency: Standard

General Description:
HDL Bencher only allows waveform inputs to transition on the clock edge and not between clock edges when doing clock timing. Is there a way to toggle the inputs asynchronously?


This is possible if combinatorial timing is used instead of clock timing. The pattern wizard can be used to toggle the clock signal every "X" sections. You will then be able to toggle 2X times within the rising edges.
AR# 11507
Date Created 05/01/2001
Last Updated 12/11/2006
Status Archive
Type General Article