UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 11603

4.2i Foundation - Project Manager: When I upgrade to a new Foundation version and re-implement a project, an incorrect part is selected

Description

Keywords: Foundation, 2.1i, 3.1i, 4.1i, upgrade, part, selection

Urgency: Standard.

General Description:
I have upgraded to a new Foundation version. When I re-implement a project created in the older version, the design is implemented with the last part selected in that version. I am able to change the selected device, but the original device that was selected is still used.

Solution

To work around this problem:

1. Clear all implementation data by selecting Project -> Clear Implementation Data.

2. Close the Project Manager.

3. Edit the <Projectname.pdf> file, and change the part that is being used.

4. Reopen the Project Manager, and re-implement the design.
AR# 11603
Date Created 05/15/2001
Last Updated 08/11/2003
Status Archive
Type General Article