UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1184

Foundation Timing simulation - "BAX file <design> does not exist - XACT6 Design Manager process?"

Description

Keywords: timing simulation, BAX, does not exist, XACT6

Urgency: Standard

General Description:
When I enter the Timing Simulator in the Foundation tools, the following pop-up
window appears:

BAX file <design> does not exist.
XACT6 Design Manager Process?

This message is displayed when the Foundation Project Manager is unable to locate
a timing simulation netlist for the project.

Solution

If the design has not yet been implemented, click "Yes" to start the Xilinx Design Manager.

When you implement the design, be sure to check the box next to "Produce Timing
Simulation Data" in the Design Implementation Options window (under Setup->Options
in the Flow Engine). When you exit the Design Manager, the Foundation simulator will load
the design.

If the design has already been implemented, ensure that the "Produce Timing Simulation
Data" box was checked.
AR# 1184
Date Created 08/27/1996
Last Updated 04/04/2001
Status Archive
Type General Article