UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 11841

*Obsolete* 3.1i - JTAG Programmer: "Cannot definitively confirm status of chip. Verify that DONE went high manually."

Description

Keywords: JTAG, confirm, status, chip, verify, DONE, manually

Urgency: Standard

General Description:
When I try to program a device with JTAG Programmer, the following warning appears:

"Cannot definitively confirm status of chip. Verify that DONE went high manually."

Solution

JTAG Programmer is unable to read the status of the DONE pin if the security bits are set. To determine whether the security bits are set, open the "design.bgn" file and look for the following flag: -g Security:<value>

For JTAG Programmer to detect the status of the DONE pin, the flag must be set to "none":
-g Security:none

The other settings, which will prevent JTAG Programmer from reading the status of the DONE pin, are:
-g Security:LEVEL1
-g Security:LEVEL2
AR# 11841
Date Created 08/29/2007
Last Updated 09/26/2005
Status Archive
Type ??????