We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12083

4.1i Project Navigator - Changes in the schematic are not reflected in the testbench waveform


Keywords: SCH2VHDL, schematic, update, waveform

Urgency: Standard

General Description:
When I make a change to a schematic source, the associated testbench waveform (.tbw) does not reflect the change when it is opened.


This occurs because the HDL model for the schematic is not updated before the .tbw file is opened.

Force the HDL model to update by right-clicking on "View VHDL/Verilog Functional Model" under "Design Entry Utilities", and selecting "Rerun".

This issue was fixed in the 5.1i software release.
AR# 12083
Date Created 07/26/2001
Last Updated 08/11/2003
Status Archive
Type General Article