UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12165

2.0 eProduct Designer - VCS/VCSi Virtex-II Pro special components do not work with VCS/i Verilog simulator

Description

Keywords: Innoveda, ePD 2.0, VCS/i, VCS, Virtex-II Pro

Urgency: Standard

General Description:
Virtex-II Pro special components do not work with a VCS/i Verilog simulator.

Solution

The special components (i.e., gigabit tranceivers and processors) that utilize SmartModel as a simulation source only work with VCS/i Verilog simulator with the following work-around:

Download and install the patch for fusion (epd20_Fusion3.1_Web_Update.exe at:
http://www.innoveda.com/support/updatesanddownloads.asp
Proceed with the steps that are suggested in this document for SmartModel VCS/i compilation. When you are preparing for Simulation with a Verilog Model, add the following command after "-lmc-swift":

-LDFLAGS
"epd20_installation_area\2.0\sim\2001.2\vcsi\win32\lmc\swift\lsm_swift_option2.obj

epd20_installation_area\2.0\sim\2001.2\vcsi\win32\lmc\swift\swift_explicit_load.obj"

-LDFLAGS /FORCE:MULTIPLE

NOTE: epd20_installation_area is the ePD installation area.

Please contact Innoveda for future Fusion patches:
http://www.innoveda.com
AR# 12165
Date Created 07/27/2001
Last Updated 02/07/2006
Status Archive
Type General Article