UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12195

4.1i Floorplanner - Carry chain is not displayed in the correct order with the 4.1i FNF

Description

Keywords: carry, chain, order, FNF

Urgency: Standard

General Description;
If I remove and then replace the carry chain from Floorplanner, the carry chain gets inverted (top-to-bottom and bottom-to-top). Why?

Solution

To work around this problem, do not remove the carry chain after you do "Replace All with Placement."

This will be fixed in the next major software release.
AR# 12195
Date Created 07/30/2001
Last Updated 08/15/2003
Status Archive
Type General Article