UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12197

4.1i Floorplanner - Carry chains are not displayed when launched from Project Navigator/DM/Command line

Description

Keywords: carry chain, ISE, Project Navigator, ProjNav, Design Manager, DM

Urgency: Standard

General Description:
I lock down my carry chain in the UCF and netlist. However, they are not displayed in the Floorplanned window when I launch Floorplanner from the Project Navigator/Design Manager command line.

Solution

To work around this, open the design from within Floorplanner (the carry chains will be normal). After you launch Floorplanner from the Project Navigator/Design Manager command line, close and re-open the design.

This will be fixed in the next major software release.
AR# 12197
Date Created 07/30/2001
Last Updated 08/15/2003
Status Archive
Type General Article