UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12574

4.1i Virtex-II MAP - A crash occurs when I use the "-timing" option

Description

Keywords: -timing, timing, driven, RPM, Block, BLKRAM

Urgency: Standard

General Description:
MAP crashes immediately after the message, "Performing timing-driven analysis...".

(In one case, the problem was found to be caused by a problem in handling an area-constrained RPM with a BLKRAM as a reference component while in timing-driven mapping mode. All three of these factors contributed to the error.)

Solution

This problem is fixed in the latest 4.1i Service Pack, available at:
http://support.xilinx.com/support/techsup/sw_updates.
The first service pack containing the fix is 4.1i Service Pack 3.
AR# 12574
Date Created 09/17/2001
Last Updated 08/20/2003
Status Archive
Type General Article