UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12618

EXEMPLAR - How do I target radiation hardened (RadHard or QPro) Virtex parts in LeonardoSpectrum?

Description

Keywords: radiation, hardened, RadHard, Virtex, Leonardo, Spectrum, Leonardo Spectrum, Exemplar, QPro, Leo

Urgency: Standard

General Description:
As there are no radiation hardened (RadHard) device selections in Leonardo Spectrum, how do I target radiation hardened Virtex parts?

Solution

There are no RadHard parts listed in the GUI, but you can use the following mapping between RadHard and Virtex devices:

Virtex QPro.......................Virtex Equivalent Part for synthesis and place and route
XQVR300CB228................v300CB228
XQVR600CB228................v600CB228
XQVR1000CG560...............v1000CG560

Only a -4 speed grade is available in radiation hardened parts, so be sure to choose -4 when targeting for the devices above.

The data sheet for Virtex radiation hardened parts can be found at: http://www.xilinx.com/partinfo/ds028.pdf
AR# 12618
Date Created 09/20/2001
Last Updated 04/20/2007
Status Archive
Type General Article