UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12625

4.1i Install - The "Add Device" installation feature will not install a selected new device

Description

Keywords: Install, Aldec, Foundation, add, devices, Project Manager, missing

Urgency: Standard

General Description:
After I run "Add Device" on the Foundation Series 4.1i CD, the new device I have selected does not appear in Project Manager.

Solution

1

The Foundation Aldec installer and FPGA Express installer are not run during the Add Device operation, so some files are not being installed for Project Manager.

To work around this problem, re-run the installation using "Typical Install", and select the new devices that you wish to be installed.

2

To install a new device into Foundation Aldec Project Manager after an installation, use "Custom Installation" instead of "Add Device." Add the desired device with the default programs, and the device will be installed into Aldec Project Manager.
AR# 12625
Date Created 09/20/2001
Last Updated 11/05/2003
Status Archive
Type General Article