We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12654

4.1i Virtex-II PAR - Modular Design Assembly fails with: "INTERNAL_ERROR:Place:basplprcntl.c:2539:1.38 - Can not place component."


Keywords: internal error, place, PAR, component, basplprcntl

Urgency: Standard

General Description:
Modular Design fails during the Assembly Phase with the following Placer error:

INTERNAL_ERROR:Place:basplprcntl.c:2539:1.38 - Can not place component


This error occurs because the Guide was unnecessarily placing context logic in sites that were needed for carry chains and RPMs.

This problem is fixed in the latest 4.1i Service Pack, available at:
The first service pack containing the fix is 4.1i Service Pack 2.
AR# 12654
Date Created 08/29/2007
Last Updated 10/23/2008
Status Archive
Type General Article