UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12709

*Obsolete* 4.1is2 iMPACT, 9572 - "Error: The IDCODE read from the device does not match the BSDL file."

Description

Keywords: iMPACT, IDCODE, version

Urgency: Standard

General Description:
When I configure certain 9572 devices with iMPACT, the following error is reported:

"ERROR:iMPACT:583 - '1' The IDCODE read from the device does not match the IDCODE in the BSDL file.
'1' Check to make sure if version '0010' is supported."

However, the device was able to configure with the same .jed file when I used JTAG Programmer.

Solution

This problem is related to the issue noted in (Xilinx Answer 12737).

This problem is fixed in the latest 4.1i Service Pack, available at:
http://support.xilinx.com/support/techsup/sw_updates
The first service pack containing the fix is 4.1i Service Pack 3.
AR# 12709
Date Created 09/28/2001
Last Updated 09/26/2005
Status Archive
Type General Article