We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12985

4.1i ISE, ECS - When I scroll in "Net Naming" mode with a scroll mouse, many instances of the net name are printed around the screen


Keywords: 4.1i, ISE, ECS, scrolling, Netname

Urgency: Low

General Description:
I am using a mouse with a scroll wheel; when I scroll across the screen while using "Net Naming" mode, the net name I am attempting to place on the schematic is printed in many places around the screen.


The names that are printed are only temporary. You may remove them by pressing "F5" to refresh the screen, or by going to the menu and selecting View -> Refresh.

This problem is fixed in the 5.1i software, which is scheduled to be released in September, 2002.
AR# 12985
Date Created 10/23/2001
Last Updated 08/11/2003
Status Archive
Type General Article