We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 13007

4.1i Install CD - The "Select Xilinx Devices" box is blank (Windows 98)


Keywords: Install, 4.1i, select, Xilinx, device, box, blank, empty, Windows 98, CD

Urgency: Standard

General Description:
When I run a 4.1i installation, after entering my Registration ID, a "Select Xilinx Devices" box appears; however, it is empty.


An issue that occurs only on Windows 98 causes the installer to accept a Registration ID for a product that is different than the one actually being installed. This can occur if you are using an ISE Registration ID on a Foundation Series installation, and vice-versa.

Please re-register your software with the Product ID code listed on the back of the CD Pack that you are installing. You will receive a new Registration ID by e-mail that will allow you to install your product correctly.
AR# 13007
Date Created 10/25/2001
Last Updated 11/05/2003
Status Archive
Type General Article