UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 13069

5.2isp3 iMPACT - Configuring larger Virtex-II Pro devices results in iMPACT recognizing XC2VP50 as XC2VP70, a verify failure, or other errors

Description

Keyword: II, XC2VP, BSD, initialize, chain, configure, fatal, verify, fail

General Description:

When I attempt to initialize or configure a chain, fatal errors and verify failures occur, or iMPACT reports errors such as the following:

"Error : Cannot find xc2vpxx bsd."

These problems occur when the chain contains the following Virtex-II Pro parts:

XC2VP30

XC2VP40

XC2VP50

XC2VP70

XC2VP100

Solution

This problem has been fixed in the latest 6.1i Service Pack, available at:

http://support.xilinx.com/xlnx/xil_sw_updates_home.jsp
The first service pack containing the fix is 6.1i Service Pack 1.

A patch for 5.2isp3 iMPACT is also available.

http://www.xilinx.com/txpatches/pub/swhelp/ise5_updates/soln13069.zip

Alternatively, you can contact Xilinx support for this patch at:

http://support.xilinx.com/support/services/contact_info.htm

If you have questions when installing the patch or if you replace the incorrect file, please open a WebCase at:

http://support.xilinx.com/support/clearexpress/websupport.htm

AR# 13069
Date Created 08/29/2007
Last Updated 12/15/2012
Status Active
Type General Article