We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 13493

4.2i Data2BRAM - The bit file update is incorrect for BRAM components with a data port width of 4, 2, or 1 bits


Keywords: Data2BRAM, bit file, BRAM

Urgency: Hot

General Description:
When I run Data2BRAM, the bit stream is not correctly updated for BRAM components when the data port width is 4, 2, or 1. Here is an example of the command line being used:

"data2bram -bm system_bd.bmm -bd count.elf -bt system.bit -o b system_updated.bit"

The system_updated.bit does not contain updated BRAM contents.


This problem is fixed in the latest 4.2i Service Pack, available at:
The first service pack containing the fix is 4.2i Service Pack 1.
AR# 13493
Date Created 08/29/2007
Last Updated 09/04/2003
Status Archive