We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 13618

4.2i Project Navigator - I cannot integrate ISE with Mentor Graphics (Design Manager/Design Architect) version EN2001.1


Keywords: script, Mentor, ISE, Alliance, 3.3, 4.1i, graphics, unexpected, value

Urgency: Standard

General Description:
When I attempt to integrate Mentor Graphics tools (version EN2001.1 or greater), the integration script that Xilinx provides reports a "suspended and unexpected value" error.


This error occurs because the Xilinx script checks out a Mentor Product ID, but is not detecting the expected value, as Mentor has changed its Product ID nomenclature since the script was created.

Xilinx (as of the 4.1i software) only supports C.4 and D.1 of the Mentor tool set, per the Mentor Interface Guide in the Software Manual:

The ISE 5.1i software supports the new Product ID nomenclature and allows for integration with later Mentor Graphics tool sets.
AR# 13618
Date Created 01/16/2002
Last Updated 08/11/2003
Status Archive
Type General Article