We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 13818

*Obsolete* 4.1isp3 iMPACT - "ERROR:iMPACT:9 - ... Checksum Error on line::(last line of .mcs)" is reported when I program with a Readback .mcs file


Keywords: iMPACT, Checksum, readback, PROM

Urgency: Standard

General Description:
When I attempt to program a PROM using iMPACT with a Readback .mcs file, the following error message is reported:

"ERROR:iMPACT:9 - ... Checksum Error on line::(last line of .mcs)"

After I close the error message box, iMPACT then reports that programming is successful.


To work around this problem, exit iMPACT after the XC18V00 readback has occurred, but before using the readback MCS file.

This problem will be fixed in the 5.1i software, which is due to be released in September, 2002.
AR# 13818
Date Created 02/07/2002
Last Updated 09/26/2005
Status Archive
Type General Article