UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 13886

7.0.3 Synplify - Error: "@E:"file_name":xxx:xx:xxx:xx|port ENMCOMMAALIGN does not exist"

Description

Keywords: GT, V-II, Pro, Virtex, II, Synplify, Synplicity, giga, bit, transceiver, E-Minor, 4.2i, dk, development, kit

Urgency: Hot

General Description:
When I synthesize a design in 4.2i and Synplify 7.0.3 with a "GT" component instantiated, the following error message is reported:

"@E:"file_name":xxx:x:xxx:xx|port ENMCOMMAALIGN does not exist."

Solution

Synplicity has provided a patch to overcome this issue. To obtain the patch, please follow the instructions below.

Download Instructions:
The patches for PC and UNIX platforms are available for download at the following locations:

PC Patch:
<ftp://ftp.synplicity.com/support/syn703_v2p_patch.zip>

UNIX Patch:
<ftp://ftp.synplicity.com/support/syn703_v2p_patch.tar.gz>

Installation Instructions:

1. Download the following files from the URL above:

syn703_v2p_patch.zip (PC users)
syn703_v2p_patch.tar.gz (UNIX users)

and save them to a temporary directory.

2. Extract the .zip or .tar file to the root directory of your Synplify software installation. The archive, which has a pre-defined directory structure, will replace the appropriate files under the Synplify installation directory with new files.

3. Restart the Synplify software after installing the patch.

(NOTE: This issue will be resolved in the next release of Synplify, at which point the patches will no longer be available.)
AR# 13886
Date Created 02/15/2002
Last Updated 10/20/2005
Status Archive
Type General Article