We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14134

4.2i PAR - VCC/GND signals not guided properly in the Partial Reconfiguration assembly phase


Keywords: Partial, Reconfiguration, assembly, VCC, GND, guide

Urgency: Standard

General Description:
During PAR guided assembly in partial reconfiguration, the VCC/GND signals are generated by the router during active module implementation. These signals should be pushed to the completed design during the assembly phase, but are not.

(This is required for Partial Reconfiguration to work correctly in the 4.2i software.)


This problem is fixed in the latest 4.2i Service Pack, available at:
The first service pack containing the fix is 4.2i Service Pack 1.
AR# 14134
Date Created 08/29/2007
Last Updated 10/23/2008
Status Archive
Type General Article