We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14183

5.1i CORE Generator - Can the update installer be used to install cores packaged by the IP Capture Tool?


Keywords: COREGen, install, IP, Capture, Tool, update, installer, GUI

Urgency: Standard

General Description:
When I install a core packaged by the IP Capture Tool, the update installer promptly reports the following message:

"CORE Generator will now exit and install the core. It may take few minutes. Please wait for a completion prompt."

Upon acknowledging this message, CORE Generator exits; however, no completion prompt is issued.


The update installer is looking for information in the packaged core that is not included by the IP Capture Tool; therefore, the installer cannot extract any files.

To work around this problem, extract the packaged cores manually, using the WinZip utility for a PC or a Tar command on a UNIX platform.
AR# 14183
Date Created 08/29/2007
Last Updated 03/04/2008
Status Archive
Type General Article