UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14653

7.1i ISE - In Project Navigator, only EDIF is available as a Design Flow preference. (No synthesis flows are listed.)

Description

Keywords: Project Navigator, ISE, synthesis, XST, Leonardo, schematic, Synplicity, ECS, EDIF, design flow, ABEL, source, EDN

Urgency: Standard

General Description:
In Project Navigator, EDIF is the only Design Flow selection available under Source -> Properties. No synthesis flows are listed.

When I add a source to my project, the only extensions allowed are: .txt, .edn, .edf, .sedif, and .ucf.

Solution

This behavior is typical for Alliance software.

To use a synthesis flow, ISE Foundation series software must be installed. (Contact your distributor to obtain Foundation software.)
AR# 14653
Date Created 05/10/2002
Last Updated 12/11/2006
Status Archive
Type General Article