UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15474

4.2isp3 iMPACT - SelectMAP verification using a MultiLINX cable fails with the error: There are xxx differences...Verification failed

Description

When I attempt to program a device using a SelectMAP mode with a MultiLINX cable, DONE goes high, but errors are reported during verification.

"ERROR:Bitstream:98 - There are xxx differences.

ERROR:iMPACT:395 - The number of difference is xxx

Verification failed."

Solution

This problem will be fixed in a future software release.

This verification problem occurs only when using a MultiLINX cable to program in SelectMAP mode.

To confirm that the configuration has completed successfully, monitor the status of the DONE pin.

AR# 15474
Date Created 09/03/2007
Last Updated 12/15/2012
Status Active
Type General Article