We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15494

5.1i ISE - Several Synplicity 7.1 options are not available from the Project Navigator GUI


Keywords: Project Navigator, ProjNav, GUI, Synplicity, 7.1, options, properties, USE 2001 Verilog, start/end points, critical paths, Push Tristates

Urgency: Standard

General Description:
Several options that are available in Synplicity 7.1 are not available from within Project Navigator. These options include:

"USE 2001 Verilog"
"Push Tristates across process/block boundaries"
"Number of critical paths reported"
"Number of start/end points for timing report"


The four Synplify options listed above have been added to the Project Navigator GUI in the latest 5.1i Service Pack, available at:
The first service pack containing the fix is 5.1i Service Pack 1.
AR# 15494
Date Created 08/27/2002
Last Updated 02/07/2006
Status Archive
Type General Article