We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1550

PROsim: Simulation with OSC4.1: could not find WIR file xc4000:osc4.1


When running timing simulation with PROseries tools, VSM will give following error message on XNFBA.1
Error - could not find WIR file xc4000:osc4.1


Check the box that says:
"Design contains XBLOX, RAM, ROM, or XABEL Modules", in the functional
simulation even if this is not the case.

AR# 1550
Date Created 11/26/1996
Last Updated 04/05/2000
Status Archive
Type General Article