UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15597

4.2wp3 WebPACK, iMPACT - When I attempt to program a Virtex-II device in slave serial mode, an error reports: "iMPACT FATAL_ERROR: GuiUtilies: WinApp.c:570"

Description

Keywords: slave serial, WebPACK

Urgency: Standard

General Description:
When I attempt to program in slave serial mode with iMPACT (WebPACK 4.2 WP3.0), the following error is reported:

"FATAL_ERROR:GuiUtilies: WinApp.c:570 -- This application has discovered an exceptional condition from which it cannot recover.
Process will terminate."

Solution

(This problem only affects the WebPACK 4.2WP3.0 version of iMPACT.)

You can successfully program the Virtex-II device without problems by using the full version of 4.2i sp3 iMPACT.

This is fixed in the WebPACK 5.1WP0.0 version of iMPACT.
AR# 15597
Date Created 09/12/2002
Last Updated 01/19/2004
Status Archive
Type General Article