UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15863

5.1i PACE - If a Logic folder is dragged and dropped from a design hierarchy, an Area Group without a range is created in the UCF

Description

Keywords: PACE, Logic, Area Group, range

Urgency: Standard

General Description:
If I drag and drop a Logic folder from design hierarchy, an Area Group without a range is created in the UCF.

Solution

To work around this issue, follow these steps:

1. Right-click on the Logic folder in the Design Hierarchy window.
2. Select "Object Properties" to bring up the Hierarchical Group Properties window.
3. Fill in the name column appropriately.
4. Assign the Area Group by dragging and dropping.

PACE will now write out the Area Group range.
AR# 15863
Date Created 10/14/2002
Last Updated 03/06/2005
Status Archive
Type General Article