UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15868

5.1i iMPACT, 18V00 - "Programming Failed" is reported during a program/verify operation on a device chain set in concurrent mode

Description

General Description: 

When a chain containing both an 18V00 PROM and FPGA(s) is programmed and verified using the iMPACT JTAG "Concurrent Programming" method, the software reports: 

 

"ERROR:iMPACT:1353 - ACD entry ERASE_PROGRESS_COUNT not found for device family xxx. 

EXCEPTION:iMPACT:ConstraintsManager.c:370:1.26 - Data not found. 

ERROR:iMPACT:636 - performOperation() failed!"

Solution

If you individually program and verify the devices (sequentially) on the same chain, the process works correctly. To set iMPACT for sequential mode, go to Edit -> Preferences and un-check the "Concurrent Mode" box. 

 

This problem is fixed in the latest 5.1i Service Pack, available at: 

http://support.xilinx.com/support/techsup/sw_updates  

The first service pack containing the fix is 5.1i Service Pack 2.

AR# 15868
Date Created 09/03/2007
Last Updated 05/15/2014
Status Archive
Type General Article