We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 16460

5.1i TRACE (TRCE)/Timing Analyzer - Hold errors are reported, but the paths are not identified


General Description;

When I run TRCE or Timing Analyzer, I see that hold errors have occurred, but the paths are not identified. Will this be fixed?


The tools were reporting a false hold violation and can safely be ignored.

There is no work around for this issue.

This issue was fixed in the 5.2i software release.

AR# 16460
Date Created 09/03/2007
Last Updated 01/18/2010
Status Archive
Type General Article